The special anion generation technology can greatly enhance the content of negative ions in the air and improve the quality of home air. The special odor purifying technology releases negative ions for a long time, making the home air fresher, just like living in a big forest. Free formaldehyde is not detected, low heavy metals, and hydrophobic and oleophobic function, to ensure the wall surface lasting brightness.

　　Features:

　　●Continuous release of negative ions

　　●Fine and smooth handfeel

　　●Purifying air and fresh smell

　　●Strong covering power

　　●Soothing to body and mind

　　Superior anti-mold and anti-algae function

　　●Strong scrub resistance

　　Construction method:

　　This product can be brushed, rolled or airless sprayed

　　Uses:

　　It is suitable for the coating of masonry, concrete, cement pressure board, gypsum board and other surfaces.

　　Theoretical paint consumption (based on dry film 30μm):

　　12-14 square meters/liter/single time (the actual coating area varies according to the roughness and dryness of the substrate surface, construction method and dilution ratio).

　　Construction process:

　　●New wall: two times of putty (sanding and cleaning) → one time of anti-alkali primer (sanding and cleaning) → two times of top coat:

　　●Old wall: remove mildew, sanding, cleaning → anti alkali primer once (sanding, cleaning) → top coat two times.

　　Construction instructions:

　　After the new wall is dried, the moisture content should be less than 6% and the PH value less than 10, then use our anti-alkali primer (add appropriate amount of water to dilute and stir) for proper primer treatment. Then use the top coat (add appropriate amount of water to dilute and stir) to paint two times, and the recoating interval should not be less than 2 hours. It is not suitable for construction when the ambient temperature is lower than 5℃ or the relative humidity is more than 85%.

　　When working on old walls, ensure that the wall surface and putty have high strength (not loose), otherwise it is easy to cause defects such as dehiscence, cracking, peeling, poor leveling and poor water resistance.

　　Drying time (at 25°C):

　　30 minutes for surface drying, 120 minutes for hard drying

　　Re-coating:

　　At least 2 hours interval, wet weather or temperature is too low, should be extended appropriately.

　　Cleaning:

　　After stopping in the middle of painting and after finishing painting, please clean all utensils with water in time.

　　Storage:

　　Store in a cool, dry and ventilated place, prevent from freezing (not less than 0℃), and keep the remaining paint sealed in time.

　　Safety matters:

　　Please read the instructions in the package and label carefully before use to obtain reliable and satisfactory coating effect.

　　Open all the doors and windows as much as possible to ensure sufficient ventilation in the construction area before starting operation and use.

　　If you have allergic skin, always wear protective gear during use; if you accidentally get eye contact, please flush with plenty of water immediately and seek medical help.

　　Do not allow children or pets to enter the work area and store the product out of their reach; rinse with plenty of water immediately if contaminated and seek medical attention.

　　To ensure the ideal painting effect, please effectively separate, cover and shield the area between wood and wall, to better maintain the cleanliness of the construction site and avoid confusing construction operations, please follow the construction sequence of wood paint first and then latex paint after drying.